Tom’s 3D-Printed BIKE~ https://www.youtube.com/watch?v=9rIIJbDkpN8&t=11s
Follow-up Q&A video: https://www.youtube.com/watch?v=IzK121RzC88
_________________________________________________________________
DIY Electric Bike – Parts list
3D print designs: http://www.thingiverse.com/thing:2191603
WREN’S 3D PRINTER~ http://bit.ly/Wrens_3D_PRINTER

The VESC (Speed controller) – http://diyelectricskateboard.com/diy-electric-skateboard-kits-parts/vesc-the-best-electric-skateboard-esc/
VESC setup links: http://www.electric-skateboard.builders/t/new-vesc-user-read-this-complete-walktrough-of-the-vesc/2980
http://www.electric-skateboard.builders/t/vesc-faq-when-to-use-low-voltage-vesc-configuration/1965
http://www.electric-skateboard.builders/t/vesc-faq-easy-vesc-configuration-in-windows-mac-for-noob/2963
http://www.electric-skateboard.builders/t/vedders-vesc-6-0/3813

Bike: http://bit.ly/Wrens_BIKE
Motor: https://hobbyking.com/en_us/turnigy-aerodrive-sk3-6374-149kv-brushless-outrunner-motor.html/?___store=en_us
Saddle Bag (for battery): http://bit.ly/Battery_Pouch
Throttle Handlebar: http://bit.ly/Bike_Throttle
Batteries: 6 cell (6s=22.2V) 10,000mAh: this will deliver ABOUT 10 miles of range or less. http://bit.ly/Bike_Battery
Freewheel Cog: http://amzn.to/2qQR0ys
Seatpost Suspension: http://bit.ly/Seatpost

Nuts/screws/belts/pulley needed:
HTD5 12T pulley (with 8mm bore for motor shaft): http://www.ebay.com/itm/12-Teeth-6mm-Bore-setscrew-Timing-Pulley-HTD5M-15mm-Belt-step-motor-Aluminum-/182419904473?hash=item2a7912d7d9:g:uJgAAOSw-0xYeB3N
(Will need to bore out hole from 6mm to 8mm)
HTD5 800x15mm belt: http://bit.ly/bike_BELT
Bearings: http://bit.ly/bearings_bike

We can get these from a hardware store, otherwise you’re getting sets of 30pcs off Amazon
5pcs m4x30mm bolts (clamp motor mount to frame)
4pcs m4x10mm bolts (attach motor to mount)
1pcs m4x50mm bolt (roller bearings seat on this bolt)
5pcs m4 nyloc nuts
3pcs m3x10mm bolts (assembly of electronics case)
5mm wide cable ties (attach pulley to spokes)
_________________________________________________________________

The following should be purchased after looking at the electronics in person
EC5 battery connectors
4mm bullet connectors (for ESC)
_________________________________________________________________

~OUR GEAR~ http://bit.ly/Old_VLOG_CAMERA
ZOOM LENS http://bit.ly/VLOG_ZOOM_LENS
WIDE LENS http://bit.ly/Main_WIDE_LENS
BEST ACTION CAMERA http://bit.ly/GREATEST_CAMERA
Back Up CAMERA http://bit.ly/BEST_back_up_CAMERA
Bad Ass Mono-pod https://bit.ly/iFootage_Monopad
Corridor 360 http://bit.ly/Corridor_360_CAMERA
STARTER DRONE http://bit.ly/cheap_dji_SPARK

~LIGHTING~
CHEAPEST LIGHT WE ALWAYS USE http://bit.ly/CHEAP_LIGHT
OFFICE LIGHTS http://bit.ly/Office_LIGHTS
LIGHT ADD-ON http://bit.ly/Office_Softbox
FAVORITE LIGHTS http://bit.ly/BEST_LED_LIGHTS

~SOUND~
TINY MICROPHONE http://bit.ly/Vlog_Mic
CINE MICROPHONE http://bit.ly/Cheap_GOOD_Cine_MIC

~MORE OF OUR STUFF!~
Cmike’s

PATREON~ http://bit.ly/_Corridor_Patreon_Support
Reddit~ http://bit.ly/_Corridor_Sub-Reddit
instaG~ http://bit.ly/_Corridor_Instagram
Twitter~ http://bit.ly/_Corridor_Twitter
Store~ http://bit.ly/LimitedEditionCorridorHat

MUSIC BY
Ginger Runner “Carpet Ride”
Prince Mathicks “my name”
JHFLY “we blessed”
FILM RIOT “Cinema Pack” & “Horror Pack” https://goo.gl/ZulxSK

Leave a Reply

Your email address will not be published. Required fields are marked *